Q-See QSIPO26X Instrukcja Obsługi Pobierz pdf (Strona 34)

Current device dome

IP 192.168.1.108

Connecting

4 Network keyboard control dome

Network keyboard control domeNetwork keyboard control dome

Network keyboard control dome

Note: all the operations here are based on DH-SD protocol. You can refer to

Chapter eight for PELCO protocol operation.

4.1

4.14.1

4.1 Dome and Network Keyboard Connection

Dome and Network Keyboard ConnectionDome and Network Keyboard Connection

Dome and Network Keyboard Connection

Connect dome A cable with Pin 3 or Pin 7 of Keyboard 485 interface. Connect dome

B cable with Pin 8 or Pin 9 of Keyboard 485 Port.

4.2

4.24.2

4.2 Network Keyboard Setup before Ope

Network Keyboard Setup before OpeNetwork Keyboard Setup before Ope

Network Keyboard Setup before Operation

rationration

ration

Before setup please make sure:

• Keyboard and dome cable connections are right.

• Connect dome with power source.

• From menu operation to control point to ser properly.

When you click ESC, system pops up a warning dialogue.

Click ENTER to save setup or click ESC to exit.

Note: all the items listed here should be properly set. ID, device name, serial port

and IP are all unique.

4.3

4.34.3

4.3 Menu and Key Introduction

Menu and Key IntroductionMenu and Key Introduction

Menu and Key Introduction

Click ID and then input network speed dome ID, system

goes to current device connection dialogue box.

Click MENU system pops up a dialogue. You can use this

menu to work with dome menu.

Please refer to the following sheet for operation keys.

ID *0

Device name

Control Point IP:192.168.1.108

Control point port:37777

Protocol:DH-1

Here is for you to set ID, device

name and device type. Click ID to go

to current device connection

interface.

Move cursor to highlight “connection”

and then click ENTER. System goes to

network connection setup. Control point

IP is network speed dome address,

control point port is 37777, select

protocol as DH-1

After all the setup, please click ENTER to

save modification.

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 64 65

Komentarze do niniejszej Instrukcji

Brak uwag

Q-See QSIPO26X Instrukcja Obsługi Strona 34

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Cyfrowe rejestratory wideo (DVR) Q-See QSIPO26X