Q-See QC8116 Instrukcja Obsługi Strona 21
- Strona / 43
- Spis treści
- ROZWIĄZYWANIE PROBLEMÓW
- BOOKMARKI
Oceniono. / 5. Na podstawie oceny klientów
40 41
Removing and Configuring Cameras.
The Added Devices section of the window shows the list of cameras connected to the NVR along with
information about each device including ID and manufacturer. A series of icons to the right of the channel
ID provides additional information.
Icon Meaning Description
Editable
You may edit the settings on this device by double-clicking on it
Cannot
Delete
This device is connected directly to the NVR and must be physically
unplugged to be removed from this list.
Removable
This device may be deleted from the list by checking the box next
to it and clicking on the Delete button below.
Device
Status OK
The connected device is operating normally.
Device
Error
There is an issue with the connected device that is preventing it
from operating normally.
A locally connected camera may show itself as Removable but when deleted, it will automatically
reconnect to the NVR.
Clicking the Edit icon will open the Modify
window where changes can be made to the
camera’s connection settings.
NOTE! Changing a camera’s
connection settings can cause the
NVR to lose that connection until
changes are made at the camera.
Auto/TCP/UDP - QC IP cameras are set for
automatic connection. Other cameras may require
different connection protocols. Consult your
camera’s manual for the proper choice.
PICTURE 4-5
PICTURE 4-6
Status Tab
This tab shows some of the same information
also found in the Remote Device tab, but also
displays information regarding motion and alarm
status for specific cameras as well.
PICTURE 4-2
PICTURE 4-4
PICTURE 4-3
REMOTE
This submenu is for adding and controlling
cameras connected to the NVR either through its
POE ports or over a network/Internet connection.
Remote Tab
This tab shows all the cameras connected to your
NVR. Cameras connected through the POE ports
will automatically appear on this list. Cameras on
the same local network and the Internet will need
to be added.
Local Cameras
1 Connect the camera and NVR using the CAT5e
Ethernet cable.
2 The PoE port can power a camera up to 200
feet away.
3 The camera’s video will appear after a few
seconds.
4 Cameras will be assigned to a channel based on
the order they were connected.
Local Network Cameras
1 Connect your camera to any network port
connected to the same router as your NVR
2 The camera will require its own power supply,
called a “POE Injector”, or a power adapter.
3 Connect the camera ton the same network (ie;
connected to the same router) as the NVR.
4 The camera’s video will be received by the NVR
through the latter’s network connection.
5 Click Device Search (item a in Picture 4-3)
6 Select the desired camera and then click Add
Over the Internet
1 Connect the camera to any network port with
access to the Internet.
2 The camera will require its own power supply,
called a “POE Injector”.
3 You will need to use the IP Tool or Smart
PSS Software included on the Manuals and
Software CD.
4 Follow instructions in the IP Camera Manual
(also on the CD) to get the IP address of the
camera.
5 Click Manual Add (item b in Picture 4-3)
6 Enter the camera’s IP address and port, along
with the user name and password. The default
TCP Port is 3777. Leave the Manufacturer,
Decode Buffer and Remote Channel settings
unchanged.
7 Click Save
a
b
After adding any camera, be certain to click Save at the bottom of the Setting window.
- QC SERIES 1
- USER MANUAL 1
- About this Manual 2
- TABLE OF CONTENTS 3
- INTRODUCTION 4
- FEATURES AND SPECIFICATIONS 5
- CONNECTIONS AND CONTROLS 6
- 2.2 MOUSE CONTROL 7
- 2.3 REMOTE CONTROL 7
- 9 Screens 16 Screens 8
- SHORTCUT MENU 8
- STATUS ICONS 9
- NAVIGATION BAR 9
- SHORTCUT VIDEO CONTROLS 9
- 1 2 3 4 5 6 9
- FUNCTIONS 10
- SETTINGS 10
- 2.6 IP CAMERAS 11
- BASIC CONTROLS 12
- EXPANDED CONTROLS 12
- RUNNING PTZ FUNCTIONS 12
- PROGRAMMING PTZ FUNCTIONS 12
- 24232221201918171615140121110 15
- 9876543210 15
- 3.2 PLAYBACK 16
- DIGITAL ZOOM 17
- VIDEO CLIP 17
- SAVING A FILE 17
- 3.3 BACKUP 18
- 3.4 SHUTDOWN 19
- CAMERA SETTINGS 23
- CAMERA NAME 24
- RECORD SCHEDULE 24
- RECORD STATUS 25
- DETECTIONS 25
- ABNORMALITY 27
- 4.3 NETWORK 28
- BLOCK/ALLOW LIST 29
- POE SWITCH 29
- HARD DISK (HDD) MANAGER 30
- GROUPING 30
- GENERAL SETTINGS 31
- DISPLAY SETTINGS 32
- ACCOUNT SETTINGS 32
- AUTO MAINTENANCE 33
- IMPORT AND EXPORT 33
- HARD DISK DRIVE 35
- BITS PER SECOND (BPS) 36
- ONLINE USERS 37
- 5.4 ACTIVITY LOG 38
- ALARM INPUT 39
- ALARM OUTPUT 40
- A.3 TROUBLESHOOTING 42
- A.4 Q-SEE PRODUCT WARRANTY 43
- A.5 TECHNICAL SUPPORT 43
Powiązane produkty i podręczniki dla Cyfrowe rejestratory wideo (DVR) Q-See QC8116
(22 strony)
(28 strony)
(120 strony)Philips HTS3265/98 manuály
Uživatelské manuály a uživatelské příručky pro Systémy domácího kina Philips HTS3265/98.
Poskytujeme 1 manuály pdf Philips HTS3265/98 ke stažení zdarma podle typů dokumentů: Uživatelský manuál
Komentarze do niniejszej Instrukcji