Q-See QSD9004 series Instrukcja Użytkownika Strona 14
- Strona / 40
- Spis treści
- ROZWIĄZYWANIE PROBLEMÓW
- BOOKMARKI
Oceniono. / 5. Na podstawie oceny klientów
User Manual
11
complete the schedule you activate it by clicking the [Apply] button.
You can also click on the Default button to use the system defaults. The system default settings are:
Hr01:00 am-07:59 am : No recording
Hr08:00 am-18:59 pm : Normal recording
Hr 19:00 pm- 00:59 pm : Alarm recording
Explanation: Under the recording Set menu and recording search menu, original color stands for no
recording, “Red” stands for alarm recording, “Green” stands for normal recording and “Blue” stands for the
channel and date you have selected.
5.2.3 Network Setup
Enter into [Main MenuNetwork Set] to setup the network configuration (Shown as picture 5-7):
5.2.3.1 DHCP
When selecting DHCP the router will allocate DVR IP address automatically After you exit the menu. You
might want to write down the addresses assigned and then switch to static and re-inter the addresses so the
router does not change them later.
5.2.3.2 PPPoE
.
5.2.3.3 Static
When selecting static allocation, You will need to setup the network settings on the DVR to match the
settings of the router that you attach the DVR to. To get the router settings you would go to the Run option on
a computer attached to the same router as the DVR and type cmd and hit OK to bring up a command prompt
Recording options include All, CH-1, CH-2, CH-3, CH-4
respectively. Please click the channel you need, the channel you select
will be highlighted in “Blue” unselected channels will be “Grey”.
To setup weekly schedules, click on the box of the recording
status you want (Alarm, General, or No Record) and then click on each
box in the schedule time line that you want this method to apply to.
You can use the [From – To] pull-down menus and Copy button to
copy settings from one day to another day or all days. After you
After selecting network mode - such as DHCP, PPPOE, or
static allocation and setting up web ports (80 and 9000 by default),
you can view DVR remotely over a network or the internet.
When selecting PPPoE, you need to input user and password
provided by your internet service provider and set up web port (for
details refer to the below picture 5-8)
Picture 5-6
Picture 5-7
Picture 5-8
- CONTENTS 2
- Safety Instruction 4
- Chapter 1: DVR Features 5
- Chapter 2: Layout 6
- 2.2 Rear Panel 7
- 2.2.1 4- Channel Rear Panel 7
- 2.3 Remote Control 9
- Chapter 3: DVR Installation 10
- Chapter 4: DVR Boot up 11
- Chapter 5: DVR Menu 11
- 5.1 Main Menu Preview 12
- 5.2 Main Menu 12
- User Manual 13
- 5.2.1 Camera setup 13
- 5.2.2 Record setup 13
- 5.2.3 Network Setup 14
- 5.2.4 Recording Search 17
- Recording File Backup 18
- 5.2.5 Multi player 18
- 5.2.6 Device Management 20
- 5.2.7 System Function 27
- : Net-Viewer Program 29
- 6.2 Log-in to NetViewer 30
- 6.3.2 PTZ Control 33
- 6.3.3 Live Play Control 33
- Chapter 7: Specification 34
- Chapter 8: Appendix 35
- 8.2 Recording Alarm setting 36
- 8.3 Troubleshooting 36
- 8.5 Accessory (Optional) 38
- Customer Information Card 40
Powiązane produkty i podręczniki dla Cyfrowe rejestratory wideo (DVR) Q-See QSD9004 series
(3 strony)Extron electronics SI 3 System INTEGRATOR User Guide Handbücher
Bedienungsanleitungen und Benutzerhandbücher für Akustik Extron electronics SI 3 System INTEGRATOR User Guide.
Wir stellen 1 PDF-Handbücher Extron electronics SI 3 System INTEGRATOR User Guide zum kostenlosen herunterladen nach Dokumenttypen zur Verfügung Bedienungsanleitung
Komentarze do niniejszej Instrukcji