Q-See QT528 Instrukcja Użytkownika Pobierz pdf (Strona 25)

48 49

CHAPTER 7 REMOTE SURVEILLANCE

7.3 PORT FORWARDING

Port Forwarding allows computers and devices outside of your network to communicate

with the DVR. You will need to forward ports 80 and 6036 from the attached router to the

IP address of the DVR. Your router must be powered up and attached to the DVR before

proceeding.

STEP 1. Go to

www.portforward.com/qsee

STEP 2. Choose your DVR or

Series (QT4)

STEP 3. Select the make and

model of your router

STEP 4. To get the FREE

instructions, click the

“Click here to skip this

advertisement” link in the

upper right hand corner of

the page. You DO NOT need

to purchase the software

advertised on this page to set

up port forwarding.

PICTURE 7-13

PICTURE 7-14

PICTURE 7-15

STEP 5. After clicking on the link, follow the instructions given on the site.

You may now move on to the next section.

STEP 6. To conﬁrm that your port(s) have been forwarded correctly, go to

www.canyouseeme.org

PICTURE 7-16

PICTURE 7-17

PICTURE 7-18

A. Enter the port number for

your DVR and click “Check”

by default these DVRs use

ports 80 and 6036

B. If the port is open, you will

see the following message,

“Success: I can see your

service…”

C. If the port is not open,

you will see the following

message, “Error: I could not

see your service…”

To resolve this issue, please go back to your DVR and change your port number to 82, 85 or

89. If, after trying all three ports and an error still occurs, contact Q-See Technical Support at

877-998-3440 Ext. 540.

NOTE! If you are successful after changing the port number, you will need

to add that to the IP address when accessing the DVR via the Internet.

If, for example, you changed to port 82, the address would now read

64.245.112.90:82

When you access the DVR from a remote computer you will need to use a different address in

the Internet Explorer browser window. Instead of entering the IP address of the DVR, you need

to enter the public IP address of the router to which the DVR is attached. You can obtain this

address by going to www.MyIPAaddress.com from a computer that is attached to the same

router as the DVR. This website will display a box with the IP address you need. It will be the

bold number where the example shows 76.254.183.54

Your computer’s IP address is:*

76.254.183.54

myIPaddress.com

About myIPaddress.com

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 49 50

Komentarze do niniejszej Instrukcji

Brak uwag

Q-See QT528 Instrukcja Użytkownika Strona 25

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Cyfrowe rejestratory wideo (DVR) Q-See QT528