18 19
SNAPSHOT
You can take up to 10 still frames from a
single camera by pressing the Snapshot
button. Click on any channel in the on-screen
Preview Window to chose it. The chosen
camera will have a red outline.
Once you have selected the camera and pressed the Snapshot button, the Snap Picture
window will open.
Channel Which camera will be used. You can select a camera using the drop down.
Frame The number of still images (1-10) that will be taken.
Snap This refreshes the images. Use this if you’ve selected a different camera.
Title This will display the camera’s name in the upper left of the image.
Time This will display the time the image was taken.
Exit Closes the window without taking pictures.
Save To Shows where the files will be saved.
Browse Chose a different destination for the files.
Save Saves the images
Print
Functions
You may print the currently displayed images as you would any other
document. You have the option to preview the printed document, change
your printer settings, and print more than one image to a page.
The images will be saved with the file names shown below each picture. The files are saved
in the bitmap (BMP) format with the file name format showing the DVR’s name, the camera’s
name, the date and the time the image was captured. The first image above would have the
file name: QT4--CAM11.2011.08.30.17.01.14.708.bmp
PAN-TILT-ZOOM (P.T.Z.) CAMERA OPERATION
If you have a PTZ camera connected to a system you are monitoring, you can control it using
the interface on the right side of the Control Center Operation Interface. These controls
operate in the same manner as those on your DVR, giving you the ability to position the
camera, adjust the zoom, focus and light level.
Directional controls - rotates the dome in the direction indicated by
the arrow with the central button stopping the dome.
Rotation Speed - This slider adjusts the dome’s speed.
Iris - Increase or decrease the amount of light entering the lens
Zoom - Zoom in (+) or out (-)
Focus - Adjust the focus of the lens to give the clearest image.
Select Preset - This drop-down allows you to direct the camera to
any previously configured location.
Select Cruise - This drop-down instructs the camera to begin a tour
of pre-set locations.
PTZ preset locations and cruises must be configured on the DVR itself or remotely using the
WebClient plug in on Internet Explorer. CMS can only be used to access these settings but
not to program new ones.
ALARM DISPLAY
This area below the Preview Window shows alarms (events) as they happen. It will display the
type of event (motion detection, video loss, etc.), the name of the system recording it, which
camera triggered the alarm as well as the time.
(23 strony)
(36 strony)
(120 strony)
(54 strony)
(75 strony)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Komentarze do niniejszej Instrukcji